Three-dimensional flower stand 1Image source: Qiqiba Production steps: 1. Prepare the PVC pipe for drilling Go to the hardware market and buy a PVC pipe about 110cm long and 7cm in diameter for use. 2. Punching Drill holes on the PVC pipe at intervals of 20 cm. If you want to make a 2-sided one, just punch 2 holes. If you want to make a 4-sided one, just punch 4 holes. Today we are going to drill 4 holes, and the front and back 2 holes and the left and right 2 holes are not on the same level. 3. Wire bending Bend the iron wire prepared in advance into an iron ring. The diameter of the bend should be determined according to the size of your flower pot. Do not use too thin wire, otherwise it will easily deform. 4. Insert the iron ring into the PVC pipe Insert the bent iron rings into the PVC pipe one by one, pass the protruding part through the hole and bend it down, then use something like wire to tie it tightly to prevent the iron ring from shaking. 5. PVC pipe fixing Seal the bottom of the PVC pipe, fill it with about 1/4 of sand, insert it into the flowerpot, fill it with soil and let the soil dry, so that it will be more solid. If you have an abandoned clothes hanger base at home, you can also fix the PVC pipe to the base of the triangular clothes hanger. This can also enhance the fixation and prevent the pipe from tilting after being placed on the flower pot. 6. PVC pipe fixing In this way, a three-dimensional flower stand is ready! Place the flower pots you want one by one, and you're done! However, you need to turn it every few days to prevent the flowers from receiving uneven light. Three-dimensional flower stand 2Image source: The balcony is a little sweet Production steps: 1. Prepare PVC pipe If some flower lovers don’t have wire at home, they can also directly use PVC pipes to make it. First prepare a PVC pipe with a length of at least 1m. 2. Score and saw Draw lines on the PVC pipe at intervals of 10 cm, and then saw the marked parts with a saw. 3. Pressing under fire After sawing, slightly roast it with fire, then take another pipe and press it down along the sawed part to form a groove at the sawed part. 4. Seal the bottom Seal the bottom of the PVC pipe completely, and a three-dimensional flower stand is ready! 5. Fill the soil and plant vegetables and flowers Finally, fill the tube with soil and plant the flower or vegetable seedlings, and you're done! In addition to the flowers introduced above, there are actually many homemade flower stands that do not take up space and are easy to use for growing flowers. Come and take a look! After reading Huahua's introduction, Are you excited, fellow flower lovers? Dear flower lovers, why not try it yourself! |
As long as it can be confirmed to be Osmanthus fr...
Division It can be combined with repotting, or th...
How often should I water the Chinese evergreen? T...
1. The difference between leaves The leaves of th...
Grafting cherry trees can make the trees bear fru...
The ornamental effect of firecracker flower The f...
Carnivorous flower growing conditions Carnivorous...
1. Four seasons fertilization method 1. Spring: S...
Does the lotus prefer shade or sun? The lotus is ...
Seed collection The maturity period of azalea see...
Rosemary is a fragrant plant with both its leaves...
1. Reasonable watering The North American holly p...
Enzyme as fertilizer Enzymes can be used as ferti...
1. Planting time When it is suitable for planting...
Time for division of purple leaf sorrel Purple-le...