Squeeze the last 1㎡! By doing this, the space will immediately become 5 times larger, and you can grow 10 pots without feeling crowded!

The storage rack becomes a flower pot, and the space is instantly increased 5 times!

If you keep the flower pots at home on the balcony or in the living room, they will take up a lot of space. Some flower lovers who grow many flowers feel that they can't even fit their feet into their homes. Huahua will tell you the simplest method, which is to use the storage rack at home as a flower rack!

After using the storage rack, you can put down at least 6-8 pots of flowers, so you can save space at home immediately! For example, the shoe racks and storage racks at home can be used as flower racks. There is no need to buy them separately, and you can save money!

Of course, if you love handicrafts, you can also try to DIY a flower stand with wood or bamboo. After buying the size outside, you can take it home and just assemble it with nails!

Use three-dimensional flower pots to grow flowers. You can easily grow 20 pots!

If you are too lazy to DIY, you might as well try the following method, which is to directly buy a three-dimensional flower stand! Just fill the pot with some soil and plant the flowers directly in it!

Whether it is spider plant, green ivy or other small grass flowers, all can be planted in three-dimensional flower pots. Moreover, the small balcony at home can be fully used and does not take up any space at all!

Of course, if you don’t want to grow flowers, it’s totally fine to use it to grow vegetables! Baby spinach, rapeseed, and chives can all be grown in three-dimensional flower pots. You can just pick whatever you want to eat without having to buy vegetables!

Use wire to make a three-dimensional flower stand, which can hold 16 pots at a time!

Next, Huahua will teach you a good method to make a flower stand. It only requires 1 PVC pipe and a few iron wires!

1. Find a PVC pipe about 1 meter long and 7 cm in diameter, and then use a soldering iron to punch small holes at intervals of 20 cm.

2. When drilling holes, the upper and lower planes of the PVC pipe should be staggered, and the four holes in the front, back, left and right should not be placed on the same horizontal plane. A difference of about the distance of the iron wire is enough.

3. Bend the wire into a circle, the diameter of which depends on the size of the flower pot. If your flower pot is 10cm in diameter, then the wire diameter can be 9cm. Choose the right wire. If it is too thin, it cannot support the flower pot and it will fall easily.

4. Insert the ring made of wire into the hole, bend the protruding part, and then find something to fix it, so as to ensure that the ring will not shake at will.

5. Seal the lower end of the PVC pipe, fill it with about 1/4 of sand, and then insert the pipe into the flowerpot. Fill it with soil and water it thoroughly. When the soil in the pot is dry, it is basically fixed.

6. Just place the flowers at home directly in the iron ring, but the PVC pipe should be rotated every 10 days or so so that the flowers on the shelf can receive light evenly.

Use PVC pipes to make flower pots and squeeze out the last 1㎡!

If you have a lot of PVC pipes at home, you can also try using them to make flower stands.

1. Prepare a PVC pipe with a length of 1m and a saw.

2. Draw lines on the PVC pipe at intervals of approximately 8-10 cm, and use a saw to saw a gap along the line in the pipe.

3. After sawing, heat the cut with fire, and then use another pipe to press down on the cut so that the cut can be concave inward.

4. After finishing, stand up the PVC pipe, seal the lower end, fill in the map, and transplant the seedlings over!

5. Of course, you can also cut the PVC pipe horizontally and fix it on the balcony railing, which can also become a very practical flower stand!

Of course, you can also use three-dimensional PVC pipes to grow vegetables. The vegetables grown are fresh and delicious!