With only 3 tricks, the green radish and asparagus fern can grow wildly to 99 meters, with shiny and airtight leaves

How to grow a green radish that can grow to 99 meters?

1. Add some urea to make the green radish grow 99 meters

1. If you want the green radish to grow faster and faster, sufficient nitrogen fertilizer is essential. Huahua suggested adding some agricultural urea. Dilute 3-5 urea grains in water to create a nitrogen-rich urea solution.

2. Put the urea solution in a spray bottle and spray it on the leaves of the green radish. Use it once every 15-20 days. When the leaves of the green radish absorb the nitrogen fertilizer in urea, they will grow faster and faster as if they have eaten hormones!

2. Pour some rice water to make the leaves of the green radish green

1. If you want to make the leaves of the green radish green, regular fertilization is essential. Huahua thinks the best thing to use is the rice water that every household has. Rice washing water contains a lot of rice residue and bran, which can add nutrients to the green radish and make its leaves greener!

2. Collect the rice water, put it in a clean plastic bottle, seal it and place it in the sun to ferment. It will take about 1-2 months for the fermentation to be successful. If you want it to ferment faster, you can also put some brown sugar in the bottle!

3. After the rice water is successfully fermented, dilute it with clean water in a ratio of 1:10, and then directly water the green radish. The green radish absorbed nutrients from the rice washing water, and its leaves became greener and greener!

3. Wrap tape or fishing line to let the green ivy climb all over the wall

1. If you want the green ivy to climb all over the wall, you must give it a support point so that it can climb up the wall. The simplest way is to find a fishing line or rope, fix it on the wall, and then wrap the green ivy branches around the fishing line or rope, so that the green ivy can climb up the wall along the rope.

2. If flower lovers do not want to drill holes in the wall, they can also wait until the branches of the green ivy become longer, and then use tape to stick to the wall in small sections. This way, the green ivy can also climb the wall!

How to grow asparagus fern to 99 meters?

1. Add some slow-release fertilizer to make asparagus fern grow 99 meters

1. Asparagus fern does not like heavy fertilizer, so you can apply some slow-release fertilizer to it on a regular basis. Dissolve about 10 slow-release fertilizer granules in water, and then directly irrigate the roots of asparagus fern. Use it once every 10 days or so, and the asparagus fern will grow more and more vigorously!

2. Asparagus fern is afraid of cold. If there is no heating or air conditioning in your home, it will enter a dormant period in winter. Throughout the winter, you can water the plant thoroughly once at the Beginning of Winter and the Winter Solstice. At the same time, bury some bone meal about 3-5 cm along the asparagus fern pot, and then spray the leaves once a day to ensure humidity.

2. Place the asparagus fern in the correct position to prevent its leaves from turning yellow!

1. Asparagus fern is very sensitive to smoke and dust. Once you place it in the kitchen or near the kitchen, the smoke will fall on the leaves of asparagus fern, thus hindering the breathing of the leaves. The leaves of asparagus fern will turn yellower and yellower, so you must place asparagus fern away from smoke and dust.

2. The temperature is low in winter, and asparagus fern is particularly afraid of cold. Especially when the cold wind blows, the leaves of asparagus fern will turn yellow. Therefore, if you want to prevent the leaves of asparagus fern from turning yellow, you must place it in windy places such as away from doorways and windowsills in winter.

3. Only by pruning frequently can the asparagus fern become more and more stylish!

1. Asparagus fern grows fast and must be pruned frequently. In the early growth stage of asparagus fern, pay attention to topping it more often to control the plant shape between 30-35cm. The ratio of stem to branch should be 5:2 or 5:1. If there are too many branches, the stem will be too short and not upright enough.

Before pruning:

After pruning:

2. In the process of topping the asparagus fern, all bent stems and overly dense branches should be cut off to ensure the density of branches. If the branches are bent, tie them up to make the plant straight and upright.

How to grow spider plants to turn them into waterfalls?

1. Pour some fish tank water and the spider plant will quickly turn into a waterfall!

1. If you want the spider plant to grow vigorously, you can usually water it with fish tank water. The water in the fish tank contains a lot of fish excrement and leftover fish food, and is especially rich in nitrogen, making it especially suitable for spider plants!

2. Leave the replaced fish tank water at room temperature for 1-2 days, and then water the spider plant directly. When spider plants absorb nitrogen from the water in the fish tank, they will grow stronger and stronger. It won’t take much for them to turn into a waterfall.

2. Add some eggshells, and the leaves of the spider plant will be firm and 2 fingers wide!

1. Eggshells can supplement calcium and other trace elements for spider plants, so collect the eggshells at home, then crush them, heat them in a frying pan and fry them, this will release the calcium in the eggshells.

2. When using, you can dig a few small holes on the edge of the spider plant's pot, then bury the egg shells in the pot, and then cover it with soil. The spider plant absorbs the calcium from the eggshells, and its leaves will become wider and wider!

3. Rotate the flower pot in time to make the leaves of the spider plant more symmetrical!

1. Chlorophytum is phototropic. If you want the Chlorophytum waterfall to grow beautifully, the leaves of the entire plant must appear even. In winter, you can place the spider plant 1m away from the south balcony in direct sunlight.

2. At the same time, turn the flower pot once a week to allow every side of the spider plant to be exposed to the sun. This will make the leaves of the spider plant become symmetrical and shapely, and ensure that the drooping height is consistent.

How to grow Christmas cactus into a waterfall?

1. Bury some bean cake fertilizer, and the Christmas cactus will quickly grow into a waterfall!

1. If you want Christmas cactus to grow into a waterfall quickly, you must give it enough nitrogen fertilizer. Find a clean plastic bottle, fill it with about 1/3 of bean dregs, then add 1/3 of water, seal it and place it in the sun to ferment. Open the lid for air every 3-5 days. If the sun is not too strong in winter, you can also ferment it next to the radiator.

2. When the water in the bottle turns dark black, the fermentation is successful. At this time, pour out the clear liquid on the top of the bottle, mix it evenly with clean water in a ratio of 1:10, and directly water the Christmas cactus. After Christmas cactus absorbs the nitrogen in the bean cake fertilizer, it will grow faster and faster and finally turn into a waterfall!

2. Bury some pine needles at the bottom of the pot, and the leaves of the Christmas cactus will look like they are waxed!

1. If you want the leaves of Christmas cactus to be green and bright, you can bury some pine needles at the bottom of the pot. Find the rotten, black or gray pine needles under the pine tree, bring them back and place them in the sun for 2-3 days, then mix them with nutrient soil and place them at the bottom of the Christmas cactus pot.

2. Placing pine needles at the bottom of the flowerpot can make it loose and breathable. Even if too much water is poured, the water can leak out from the bottom of the pot, ensuring that the Christmas cactus will not rot. When the roots grow vigorously, the leaves will naturally become green and bright!

3. Christmas cactus is blooming more and more!

1. Christmas cactus is a short-day plant. If it blooms, it is basically because the light exposure time is too long. Now, after exposing the Christmas cactus to light for 8 hours every day, put it in a completely dark room, or put it in a few black plastic bags, or cover the entire Christmas cactus with cardboard boxes.

2. After repeating this cycle for about a month, you will see flower buds appearing on the Christmas cactus. Do not move the Christmas cactus at will at this time. Spray some potassium dihydrogen phosphate on it, which can allow the flower buds of the Christmas cactus to differentiate more, so that there will be more and more flowers!

How to grow Clivia with shiny leaves?

1. Bury some peanuts and melon seeds at the bottom of the pot, and the Clivia will grow more and more prosperous!

1. Clivia likes oil crops. If you want it to grow more and more vigorously, add some peanuts and melon seeds to the bottom of the pot! First, spread a layer of nutrient soil about 3 cm thick on the bottom of the pot, then grab a handful of roasted peanuts or melon seeds and sprinkle them evenly on the surface of the pot. Remember to use original flavor peanuts and melon seeds!

2. Sprinkle a handful of melon seeds and peanuts, and then cover them with nutrient soil. Remember that the roots of Clivia cannot directly contact the peanuts and melon seeds, otherwise the roots will easily burn. The roots of the Clivia absorbed the nutrients from the peanuts and melon seeds, and it grew wildly as if it was possessed!

2. Rub some beer on the leaves, the leaves of Clivia will be oily!

1. If you want to make the leaves of Clivia shiny, you have to add some fertilizer. The most commonly used fertilizer for flowers is beer! Mix the remaining beer and water in a ratio of 1:20 to make a beer solution.

2. Find a sponge or soft cloth, dip it in the beer solution, and gently wipe the leaves of the Clivia. The leaves of Clivia have many stomata, which can absorb nutrients in the beer solution, making the leaves oily!

3. Only with large temperature difference and plenty of fertilizer can Clivia bloom 100 flowers!

1. If you want Clivia to bloom more, you must apply more phosphorus and potassium fertilizers. You can go to the vegetable market to get some fish intestines, put them in a plastic bottle, add water and seal it for fermentation, then open the lid for ventilation after about 3-5 days. After it is fully decomposed, add water in a ratio of 1:50 and water the Clivia to encourage more differentiation and germination, thus more flowering!

2. Only when the temperature difference is large enough can Clivia bloom more. Now we have just entered winter and the temperature is still very cold. Ensuring that the temperature difference between morning and evening is around 15℃ can encourage Clivia to differentiate more flower buds and thus bloom more. Generally, the temperature difference in Guangdong is not big, so it is normal for Clivia not to bloom.

How to grow succulent plants that are round and plump?

1. Water less and fertilize more, and the plants will become rounder and fatter!

1. If you want the succulents to grow fatter, you must control the water so that the succulents can sense the lack of water. Over time, the succulents will use their leaves to store water, and the leaves will become thicker and thicker.

2. When repotting succulents, remember to mix 3-5 slow-release fertilizer granules into the potting soil, so that the fertilizer effect can be slowly released in the soil and then absorbed by the succulent roots. Succulent plants absorb nutrients and grow fatter and fatter!

2. Spray some of this water and the succulents will become crystal clear like jelly!

1. Autumn and winter have sufficient sunlight and large temperature differences, which is a good time to color succulents. If you feel that the temperature difference in your home is not big enough, then spray some ice water on the succulents to increase the temperature difference, reduce the chlorophyll in the leaves of the succulents, and thus increase more anthocyanins.

2. Spray the succulents once every evening. Fill a spray bottle with ice water and spray it directly on the leaves. 3-5 sprays are enough each time.

3. Do this if you want to grow leggy succulents, and they will grow in clusters and become old trees!

1. When you find that the succulents in your home are growing too tall, you can use a sterilized knife to behead them, cut off the top part of the stem, remove the apical dominance, thereby promoting the growth of side buds and growing more heads. Over time, multiple-head clusters will form.

2. After the plants have grown too long, you don’t have to cut off the heads, allowing the stems to continue to grow longer. When the stem grows to a certain length, remove all the leaves at the lower end, leaving only the leaves at the top, and then provide sufficient light. It only takes about 1 year for the stem to become woody and turn into an old stump!