If the flower doesn’t survive, throw it into water. It will take 5 days to grow roots, and the roots will be as thick as fingers!

Succulent hydroponic root induction

Every time I cut off the top and graft it, it is always difficult for succulents to take root and survive. At this time, you can use the water insertion method to allow the succulents to take root and grow white roots!

Steps:

1. For those succulents that are growing too tall, we can behead them and use sharp scissors to cut off the long heads of the succulents.

2. Place the cut succulent heads in a cool and ventilated place to dry for 1-2 days, then apply some rooting powder and place them in a bottle of water. As long as the lower end of the succulent is slightly immersed in water, it will take root within 5 days.

3. For those succulents whose roots are always rotting, you can also remove them from the pots, clean all the soil on the roots, and then wash away all the old roots and weak roots, and then directly switch to hydroponics, and the roots will grow very quickly.

How to make the roots of succulents grow more:

1. If you want the hydroponic succulents to grow more roots, you can add some slow-release fertilizer to the hydroponic bottle. Slow-release fertilizer must be used after the succulents have taken root. Dissolve 1-3 grains of compound fertilizer in water, the ratio is about 1:1000.

2. Usually, every 7-10 days, drop 5-10 drops of slow-release fertilizer solution into the hydroponic bottle of the succulent. The succulent will absorb the nutrients and the root system will grow more and more!

Lucky Bamboo Hydroponics

When growing lucky bamboo, most flower lovers encounter the problem that the lucky bamboo does not take root, or the leaves turn yellow after taking root, which is really annoying! Today, Huahua will talk about how to grow white roots in hydroponic lucky bamboo?

Steps:

1. Once you find that the roots of lucky bamboo are rotten, take out the lucky bamboo and cut off all the rotten parts.

2. When cutting with scissors, be sure to cut an approximately 45° bevel at the bottom of the lucky bamboo stem to increase the water absorption area of ​​the lucky bamboo stem.

3. Put the lucky bamboo back in the water and place it on the south balcony. Change the water every 3-5 days and it will soon take root. After rooting, change the water about once a week. When changing the water, be sure to remember to rinse the mucus on the stem with clean water.

How to make the root system of lucky bamboo more dense:

1. Root rot of lucky bamboo is often accompanied by yellow leaves. At this time, you can add some ferrous sulfate to supplement the iron element of the lucky bamboo to prevent yellow leaves and root rot. The ferrous sulfate solution must be used after the lucky bamboo has taken root. Dilute ferrous sulfate with water at a ratio of 1:1000 and mix into ferrous sulfate solution.

2. Add 5-7 drops of ferrous sulfate solution into the hydroponic bottle each time, about once every 10-15 days. You will soon find that the leaves of the lucky bamboo will no longer turn yellow, and the root system will grow more and more!

Kalanchoe water plug

As summer passes, it's time for the Kalanchoe to start growing. The branches pruned at this time can be planted in water, and they will take root very quickly!

Steps:

1. The Kalanchoe branches pruned in autumn can be cut short, leaving at least one pair of leaves on each branch, and then placed in a cool and ventilated place to dry.

2. In order to increase the rooting speed, you can soak the Kalanchoe branches in a solution of carbendazim for about 20 minutes, dry them and then insert them into water. The lower end of the branches must be immersed in the water a little bit.

3. In less than a week, the water-planted Kalanchoe will grow white roots.

How to make the root system of Kalanchoe more numerous and dense:

1. If you want the roots of the Kalanchoe to grow more and more, you can add some homemade rooting agent. Mix rice vinegar and water in a ratio of 1:100 to make a rice vinegar water solution.

2. After inserting the Kalanchoe into the water, add about 20 drops of rice vinegar solution into the bottle. Rice vinegar can stimulate the growth of the root system, making the roots grow more and more and stronger!

Rose water plug

When autumn comes, it’s time for the roses to start becoming beautiful! However, many flower lovers have reported to Huahua that rose cuttings always fail to take root, so why not try using water cuttings?

Steps:

1. Trim the branches from the rose mother plant and then cut them short to about 5-8cm for each branch.

2. Soak the pruned rose branches in a solution of carbendazim for more than 20 minutes, then take them out and place them in a cool and ventilated place to dry.

3. Then insert the rose branches into the foam, place the foam in water, and then place it in a cool and ventilated place such as the north balcony for maintenance.

4. It will take about 7-10 days for the rose planted in water to take root.

How to make the rose root system grow more and more:

If you want the rose to take root faster and grow more roots, you need to add some rooting agent. Normally, you can mix phosphate fertilizer and water in a ratio of 3:7 to form a solution, and then drop about 10-20 drops into the bottle of hydroponic roses. This can stimulate the rooting of roses, and even make the roses take root several days earlier!

Green radish water plug

After a summer of rapid growth, the green ivy has almost grown wildly, and it is time to prune it. Don’t throw away the cut branches, use them for cuttings and you’ll have new green ivy in no time!

Water plugging steps:

1. From the branches pruned from the green radish, choose the parts with aerial roots for cuttings, as the chances of rooting and survival are relatively high.

2. Cut the branches of the green radish into small sections of about 10 cm, and cut the lower end of the branch into a 45° slope to increase the contact area with water.

3. In order to promote the rapid rooting of green radish, you can make some rooting agents yourself. Dissolve white sugar in hot water, approximately in a ratio of 1:9. After the sugar water cools down, soak the green radish branches in the sugar solution for about 40 minutes, then take them out and rinse them with clean water.

4. Insert the branches of the green radish into the bottle of water, making sure that 1/4 of the branches and the aerial roots are immersed in water, and then place them in a place with sufficient scattered light for maintenance.

5. Change the water once every 2-3 days, and it will take about a week for the roots to take shape.

How to make the root system more abundant and thicker:

After the green radish has taken root, in order to make the root system grow more and denser, you can water it with some rotted rice water. Usually, collect the rice washing water and put it in the sun to fully decompose.

Just drop about 20 drops into the bottle of green radish every 8-10 days, and the roots of the green radish will grow more vigorously!

Fortune tree hydroponics

According to Huahua's observation, the money tree is relatively prone to root rot, because if you are not careful when watering, the roots will rot. In that case, why not use hydroponics?

Steps:

1. If you want to switch from soil cultivation to hydroponics of the money tree, you must first remove the money tree from the pot, and then clean the soil on the roots, especially those old roots, young roots, rotten roots, etc., all of which should be trimmed off.

2. Disinfect the root system with carbendazim solution or potassium permanganate solution. Soak the roots of the trimmed money tree in a solution of carbendazim for about 20-40 minutes, then take them out and dry the wounds in a cool and ventilated place.

3. Place the money tree in a hydroponic bottle and do not let the stem touch water, otherwise it will cause the stem to rot. Change the water once every 2-3 days, and white roots will grow in about a week.

How to make the roots of the fortune tree more dense:

1. In order to make the money tree have more roots, you can crush a tablet of aspirin and mix it with clean water in a ratio of 1:1000 to form a solution.

2. Add 10 drops of aspirin solution to the hydroponic bottle of the money tree every 10 days or so to promote faster root growth of the money tree!

Clivia hydroponics

Clivia has shiny leaves and bright flowers, and is loved by many people, but Clivia is particularly prone to root rot. So what should we do if the roots rot? Why not grow them in water?

Steps:

1. If the roots of the Clivia have rotted, it must be removed from the pot and all the rotten roots must be cut off.

2. After trimming the roots of Clivia, soak them in carbendazim or potassium permanganate solution for about 20 minutes, and then place them in a cool and ventilated place to dry the wounds.

3. Fix the dried roots of the Clivia in a planting basket, and then place it in a hydroponic bottle for maintenance. After about 7 days, the Clivia will be able to grow new roots.

How to make the root system of Clivia denser and more:

1. In order to make the root system of Clivia more, take a tablet of vitamin B12, crush it completely, and mix it with clean water in a ratio of 1:1000-1:2000 to make a vitamin B12 solution.

2. In about 5-7 days, add 10-20 drops of vitamin B12 solution to the Clivia hydroponic bottle. This can promote rooting and allow the Clivia to quickly grow white roots!

Chlorophytum comosum water plug

Many flower lovers grow spider plants at home, and after a long time, many small spider plants will grow. These small spider plants can be cut and planted in water and they can become new spider plant plants!

Steps:

1. Cut the small spider plants from the mother plant. In order to increase the survival rate, flower lovers can choose those spider plants with some roots at the bottom. It’s okay if they don’t have roots.

2. Place the cut small spider plants in a hydroponic bottle, let the bottom of the spider plants get a little wet, and then place it in a cool and ventilated place.

3. It will take about a week for the small spider plant to grow roots.

How to make the roots of spider plants white and abundant:

1. If you want the spider plant to grow more roots faster, you can add some homemade rooting agent. You can go to the willow tree on the roadside to break off a willow branch, then cut the branch into small pieces of about 5-7 cm, soak it in hot water for more than 24 hours, and make willow branch extract.

2. Put about 10 drops of willow branch extract into the hydroponic bottle. In less than half a month, you will find that the roots of the spider plant are growing more and more, and are about to burst the bottle!

Asparagus fern hydroponics

Among the flowers that Huahua has grown, the one that is most likely to turn yellow leaves is probably asparagus fern. As long as there is not enough water, the leaves of asparagus fern will easily turn yellow. In this case, why not grow it in water?

Steps:

1. Remove the asparagus fern from the pot, clean all the soil on the roots, and then cut off all the old roots, weak roots, and thin roots on the root system.

2. Soak the trimmed asparagus fern roots in a carbendazim solution for about 20 minutes to sterilize and disinfect them to prevent root rot of the hydroponic asparagus fern.

3. The stem of asparagus fern is relatively thin, so when it is hydroponically cultivated, expanded clay must be added to fix it. The water in the hydroponic bottle should cover about 2/3 of the bottle.

How to make the roots of asparagus fern grow more and more:

If you want the asparagus fern to have more roots, you can add some nutrient solution into the hydroponic bottle. Drop about 10 drops of nutrient solution into the hydroponic bottle every 10 days or so. The asparagus fern will absorb sufficient nutrients, grow more and more vigorously, and have more and more roots!

Coin Grass Hydroponics

The last thing Huahua wants to talk about is the pennywort. The pennywort has large round leaves and looks like ancient copper coins, so many flower lovers grow pennyworts at home, but how to make the pennywort grow more vigorously is a problem!

Steps:

1. If any flower lovers think that the pennywort in their home grows too slowly, why not try hydroponics? Remove the pennywort from the pot and clean the soil on the roots with plenty of water. Be careful to be gentle when cleaning, otherwise the roots will be damaged.

2. Transfer the pennywort to a hydroponic bottle, add some expanded clay or pebbles to fix it, and then add clean water. When adding water, make sure the amount of water covers the roots of the pennywort, so that the pennywort can be transformed from soil cultivation to hydroponics.

How to make the roots of the pennywort more abundant and white:

The growth rate of pennywort is very fast. As long as there is plenty of water and sunshine, it will grow vigorously without root rot. In order to prevent the roots of the pennywort from rotting, you can add a few pieces of charcoal into the hydroponic bottle, or drop a few drops of carbendazim solution, which can kill bacteria and disinfect and prevent the roots of the pennywort from rotting.